|
Coaxial and RF cables Fixings
|
ITAS proposes an wide and full range of RF
50  ,
radiating
cables and coaxial
cables fixing sets that can be differentiated into two categories |
Fixing sets
with plastic
inserts and INOX support:
This kind of device is robust and allows superposing several cables on the same support (tube, corner iron, etc.) or in limited congestion. The important range of accessories for this device allows a lot of configuration and possibilities, which is very useful.
|
|
The INOX
fixing by brooch.
This fixing device enables to install cables with a diameter between 16 to 50 mm and also allows an easy manipulation, it's the (most used model in installations). These fixings can be turned at 360°, which give them a great flexibility for cables installations and orientations.
|
|
|
Radiating
cables Fixings
|
|
ITAS have
also developed fixing devices for radiating cables. They are easy
to install and were designed so that to cope with the constraints
owing to the use of this range of cables.
|
|
There isn't any steel material that could interfere with the radiating cable (in the close area of the cable).
Each fixation is designed to place the cable at an optimum distance from its support (a wall for example).
|
| Antennas
Fixings |
| ITAS proposes
a complete and efficient range of antennas fixings in galvanised
steel and in line with NF A 91 121 and FD A 91 122 norms. They are
either fix or adjustable (distance between the antenna and the mast). |
 |
| So that to receive several antennas type, the (between) axis for antenna is adjustable. Note that ITAS can also provide you with a range of fixing sets, which allow tilting antennas (upwards or to the bottom).
All our fixing devices manufactured by ITAS are in galvanised steel and are sent with all the necessary screws (INOX) to be installed. As well, we can supply a complete range of tube to tube fixation, etc. |
| Don't
hesitate to contact us for any
request |
